x
×

NAKAMICHI NDST500A

DESCRIPTION

Nakamichi JAPAN is introducing its latest Digital Signal Processor to their NDST lineup with the NDST500A Hi-Res DSP with built-in amplifier. The NDST500A has been designed with 12 channels to allow for a wide variety of aftermarket sound integrations as well as time correction and equalizer tools to fine tune the acoustics within the vehicle.

The NDST500A is designed from the ground up to be Hi-Res capable, while carrying on features from the NDS series of DSPs which include ease of installation with OEM or factory systems with a selection of customized OE fit cables, Nakamichi head unit, or any other compatible brands of aftermarket head units.

The NDST500A also comes with a built-in amplifier providing 10 channels of output power (RMS 2CHx80W, 4CHx40W, 4CHx25W @4Ω) for installations without requiring an external amplifier, just add on a Nakamichi active subwoofer and you are good to go.

The included Nakamichi remote control with large control knob can be installed cleanly on the vehicle’s dashboard for easy volume and bass adjustments and source selection. Music can also be streamed using the NDST500A’s Bluetooth connection, bypassing the head unit altogether.

PRODUCT TECHNLLOGY DATA

PRODUCT DATA

Dynamic Range(RCA Input)
≥100dB
S/N(RCA Input)
≥90dB
THD
≤0.05%
Frequency Response
20Hz~40KHz
 
Input Impedance
High Level Input:240Ω
Low level Output Impedeance
51Ω
Signal Input Range
RCA: 7.5Vpp; High Level: 26Vpp
Signal Output Range
RCA: 8Vpp;
Amplifier Power
PEAK: 4CH×50W+4CH×80W+2CH×160W, Bridging 1×300W RMS: 4CH×25W+4CH×40W+2CH×80W
Power
DC 9V-16V
REM Input
High Level Input Signal:H1+/H1-or ACC control cable
REM Output
+12V Start up Voltage Output
Standby Power
≤0.1W
Gross Weight
Approx. 2.08kg
Product Dimension(L×H×W)
255×175×47mm

TECHNICAL SHEET

Input Type
6（8） Channel high level,2 Channel Low Level,External digital Bluetooth,Optical coaxial.
Output Type
12 Channels low
level,4CH×50W+4CH×80W+2CH×160W,Bridging 1×300W
Output Gain
Gain range:Mute,-59.9dB~0.0dB
Output Signal EQ
31-band qequalizer engine
  1. Frequency Range:20Hz~20KHz,1Hz Accuracy
  2. Q value(Slope):0.404~28.85
  3. Gain:-12.0dB~+12.0dB,0.1dB Accuracy
 
Output Signal Crossover
Each output is equipped with multi-order high and low pass independent filters.
  1. Filtering types:Link-Rill,Butter-W, Bessel
  2. Filtering frequency division point:20Hz~20kHz,Resolution 1Hz
  3. Filter slope(Slope) setting:6dB/Oct to48dB/Oct and OFF
 
Output Phase and Time Alignment
Each output channel can be adjusted for phase and delay,parameter range
Phase:in-plase or reverse-phase(0°/180°);
Delay: 0.000 to 20.000 mill, 0 to 692 cm,0 to 273 inch.
 
Presets
Save up to 6 presets into the device.

DOWNLOADS

NDST500A user-manual
 Downloads